After the application of the solid wood lippings workpiece had to be trimmed to the right measure. OptionsĮdge trimming machines of former times were serving different purposes. Little plastic stripes are mounted to bridge the gap which is needed for the overlap lippings on curved pieces. If straight pieces are processed a removeable fence is mounted for guidance. Because of the overlap of the lipping the workpiece needs to be mounted on a support. If curved workpieces are processed they will be guided through pressure on a horizontal turning disk. By hand the workpiece is driven through the milling aggregate. At the workpiece approaches the cutter heads of the two impulse devices which are vertically connected to the motors are touching the workpiece on the surface. Through a special device the two motors are held at a certain distance to each other, so that the workpiece will not be scratched on its way towards the milling tools. Depending on whether the edgeband shall be flush milled or chamfered or radius milled the motors will be equipped with a fitting tool.
So it becomes possible to process curved workpieces. Structure and Working ProcessĪ milling aggregate, which is attached to a steel pedestal, consists of two motors with axes lying in a vertical position. In such cases the milling process is done on the edge trimming machine.
#Milling machine for wood manual
Small edgebanders and edgebanders for shaped workpieces with manual feeder do not have these Flush/radius/chamfer milling units. Behind the trimming process are usually working stations for chamfering or radius milling. The upper and lower overlap is trimed with the help of milling aggregates on edgebanders. The lengthwise overlap is removed with the help of a trimming saw on an edgebander or on another post-processing machine.
Small stationary machines and portable handmachines for the post-processing of glued edgeband.Įdgeband are glued onto the panel edge with overlappings in the length and in the height.
0 kommentar(er)
